this is information on a product in full production. september 2016 docid024631 rev 5 1/8 8 STPSC6H12 1200 v power schottky silicon carbide diode datasheet - production data features ? high frequency free-wheel / boost diode ? robust high-voltage periphery ? ultrafast high voltage switching independent of temperature description st's 1200 v high-performance rectifier is specifically designed to be used in photo-voltaic inverters or in applicat ions where negligible switching losses are required. the STPSC6H12 helps to increase the application efficiency yield by up to 2% thanks to its ability to work at high frequency whatever the temperature. the central lead of the dpak package is removed to meet the iec60664 and ul 840 standard requirements for a higher voltage. these characteristics make it the best-in-class 1200 v diode. . $ . . $ ' 3 $ . + 9 / table 1. device summary symbol value i f(av) 6 a v rrm 1200 v t j (max.) 175 c v f (6 a, 25 c) typ. 1.55 v c j (300 v) typ. 30 pf www.st.com
characteristics STPSC6H12 2/8 docid024631 rev 5 1 characteristics to evaluate the conduction loss es use the following equation: p = 0.89 x i f(av) + 0.285 x i f 2 (rms) table 2. absolute ratings (limiting values at 25 c unless otherwise specified) symbol parameter value unit v rrm repetitive peak reverse voltage 1200 v i f(rms) forward rms current 11 a i f(av) average forward current t c = 125 c, ? = 0.5, dc 6 a i fsm surge non repetitive forward current t p = 10 ms sinusoidal, t c = 25 c t p = 10 ms sinusoidal, t c = 150 c t p = 10 s square, t c = 25 c 36 30 100 a i frm repetitive peak forward current ? = 0.1, t c = 125 c 28 a t stg storage temperature range -65 to +175 c t j operating junction temperature range (1) 1. condition to avoid thermal runaway for a diode on its own heatsink -40 to +175 c table 3. thermal resistance symbol parameter typ. max. unit r th(j-c) junction to case 1.3 1.9 c/w table 4. static electrical characteristics symbol parameter tests conditions min. typ. max. unit i r (1) 1. t p = 10 ms, ? < 2% reverse leakage current t j = 25 c v r = v rrm -100400 a t j = 150 c - 0.65 1.5 ma v f (2) 2. t p = 500 s, ? < 2% forward voltage drop t j = 25 c i f = 6 a -1.551.9 v t j = 150 c - 2.05 2.6 table 5. dynamic electrical characteristics symbol parameter test conditions typ. unit q cj (1) 1. most accurate value fo r the capacitive charge: total capacitive charge v r = 800 v 29 nc c j total capacitance v r = 0 v, t c = 25 c, f = 1 mhz 330 pf v r = 300 v, t c = 25 c, f = 1 mhz 30 dptot dtj < 1 rth(j-a) 4 f m y 5 g y 5 f m 3 9 2 8 7
docid024631 rev 5 3/8 STPSC6H12 characteristics figure 1. forward voltage drop versus forward current (typical values) figure 2. reverse leakage current versus reverse voltage applied (typical values) $ , ) 7 d ? & 7 d ? & 3 x o v h w h v w w s ? v 9 ) 0 9 , 5 ? $ ( ( ( ( ( ( ( 7 m ? & 7 m ? & 9 5 9 figure 3. peak forward current versus case temperature figure 4. junction capacitance versus reverse voltage applied (typical values) , 0 $ / 7 w s 7 & ? & / / / / / w s 7 & m s ) ) 0 + ] 9 2 6 & p 9 5 0 6 7 m ? & 9 5 9 figure 5. relative variation of thermal impedance junction to case versus pulse duration figure 6. non-repetitive peak surge forward current versus pulse duration (sinusoidal waveform) = w k m f 5 w k m f ( ( ( ( ( ( 6 l q j o h s x o v h w s v , ) 6 0 $ ( ( ( ( ( ( ( 7 d ? & 7 d ? & w s v
characteristics STPSC6H12 4/8 docid024631 rev 5 figure 7. total capacitive charges versus reverse voltage applied (typical values) 4 f m q & 9 5 9
docid024631 rev 5 5/8 STPSC6H12 package information 2 package information ? epoxy meets ul94, v0 ? lead-free package in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions a nd product status are available at: www.st.com . ecopack ? is an st trademark. 2.1 dpak hv 2l package information figure 8. dpak hv 2l package outline ' ' / h e / ( ( e + 0 & $ & $ 3 /
package information STPSC6H12 6/8 docid024631 rev 5 figure 9. footprint (dimensions in mm) table 6. dpak hv 2l package mechanical data ref. dimensions millimeters inches min. typ. max. min. typ. max. a 2.16 2.29 2.40 0.085 0.090 0.094 a1 0.06 0.08 0.13 0.002 0.003 0.005 b 0.71 0.76 1.07 0.028 0.029 0.030 b3 5.004 5.10 5.21 0.197 0.201 0.205 c 0.46 0.51 0.56 0.018 0.020 0.025 c2 0.76 0.81 0.86 0.029 0.032 0.034 d 5.97 6.10 6.22 0.235 0.240 0.245 d1 5.84 ref 0.230 ref e 6.48 6.60 6.73 0.255 0.260 0.265 e1 4.95 5.08 5.21 0.195 0.200 0.205 e 2.29 ref 0.90 ref h 9.70 9.83 10.08 0.382 0.387 0.397 l 1.02 1.14 1.40 0.040 0.045 0.055 l3 1.14 0.045 l4 (1) 1. maximum plastic protrusion 0.000 0.15 0.000 0.006 m7 7 p5 5
docid024631 rev 5 7/8 STPSC6H12 ordering information 3 ordering information 4 revision history table 7. ordering information order code marking package weight base qty delivery mode STPSC6H12b-tr1 stpsc 6h12 dpak hv 2l 0.368g 2500 tape and reel table 8. document revision history date revision changes 02-aug-2013 1 first issue. 05-aug-2013 2 corrected typographical error in table 7 . 13-mar-2015 3 updated mark ing information in table 7: ordering information. 06-may-2015 4 updated cover page. format updated to current standard. 01-sep-2016 5 updated cover image and figure 8 .
STPSC6H12 8/8 docid024631 rev 5 important notice ? please read carefully stmicroelectronics nv and its subsidiaries (?st?) reserve the right to make changes, corrections, enhancements, modifications, and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant in formation on st products before placing orders. st products are sold pursuant to st?s terms and conditions of sale in place at the time of o rder acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and st assumes no liability for application assistance or the design of purchasers? products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from the information set forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2016 stmicroelectronics ? all rights reserved
|
